-
format and reinstall
Ok,here's the deal.I have an old windows ME machine that I have done a quick format with the intent of putting XP back on it.It will be used as a server to play avi files on a flatscreen.The problem is apparently it won't boot from the cd first,something I should have checked first,and I can't get the cd drive to run to install XP.So I'm fucked as it stands....so how do I get around this dilemma?
-
I guess the obvious questions to ask being an old IT support guy:
- it doesn't run? Describe more please! does it sit there trying to load, does it give an error, what?
- BIOS is set to boot from CD, right?
- the disk isn't FUBAR'd?
- the HDD isn't FUBAR'd?
-
I would try the bios and change the boot order over so it boots from the cd,had to do that the other day when i wanted to run the xp repair tool.
Not a PLATINUM MEMBER? Click HERE to join.
Want to verify correctly,click HERE
Please take a look at our rules HERE Cant get HJsplit to work,please look HERE
-
There in lies the problem,how do I access the bios after doing a quick format of the harddrive?I am starting the computer from a boot floppy.It apparently is not set to boot from cd.It will start and drop me in ms dos.
-
What type of machine is it?
You probably have to hold one of these keys down relative shortly after you turn the power on
ESC
F1
F12
DEL
before it starts accessing any drives...
If you are lucky the key or key-combination will stand shortly of the first screen you'll see..
-
Now thats something i havnt done for years,removed mine when i built this one.
Well i think the principle is still the same,click delete or the button you usually use to enter your bios,then change the startup order,put your disc into your pc and startup the pc again,you could try pressing the letter R as the pc starts up too,this will activate the recovery part of the xp cd and you can then format the pc from there.
Hope this hepls mate.
Not a PLATINUM MEMBER? Click HERE to join.
Want to verify correctly,click HERE
Please take a look at our rules HERE Cant get HJsplit to work,please look HERE
-
It's an old HP with windows ME,I don't have the recovery disk for XP,but ,we have one from another XP machine in the house,also an HP.I have a full install disc of XP I am trying to use.I might have the ME recovery disc as my girlfriend saves everything soooo,maybe I could recover ME and then change the bios......I needed a challenge anyway.
-
Allrighty...
HP usually use these early in the boot (start-up) sequence:
ESC = Boot Menu
Here you can choose between floppy, harddisc, or CD (on time chose).
F1 = BIOS Setup Menu
Change top menu to "Boot" and the it should be possible to change boot-sequence to be the same every time.
F10 = Recovery Menu
Have not tried this one, but guess that it starts on a small partition and asks for a specific CD (probably Windows ME CD).
-
-
Does the full XP CD fail, when you have it in the CD drive on boot???
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
BACK BY POPULAR DEMAND!
Sign up for a Platinum account with Pay PAL
JOIN NOW
Please note: Once payment is made you need to send a private message to wicked at the forum, stating your username and the email address you used to pay.
If you do not do this your upgrade will be delayed, the upgrade will be done within 12 hrs.
Payments are made via websoftff.com
Close